Extron Electronics Cable Retraction System User Guide - Manual (Page 27)

Cable Retraction System • Operation 21
Operation
This section provides details of the retractor system operation.
• Extend a Cable
• Retract a Cable
Once installed, the retractors are ready for operation.
CAUTION:
• Do not operate a retractor until it is installed.
• When retracting, hold the cable with one hand and press the release button with
the other.
• Retraction should be a slow, controlled motion.
• Keep hands away from moving parts.
Extend a Cable
To connect a cable, grip it by the connector and pull enough cable from the retractor to
connect to the device. There is no need to press the cable release button when extending
a cable. When you stop pulling the cable, the cable release assembly will fix the length
automatically.