Extron Electronics DFX 100 Series User Guide - Manual (Page 9)

DFX 100 • Panels and Cabling 3
Panels and Cables
This section discusses the features and cabling of:
• Front Panel
• DFX 100 Tx Rear Panel
• DFX 100 Rx Rear Panel
Front Panel
Both the Transmitter and Receiver have identical front panels:
Extron Extron
a
Figure 2. DFX 100 Tx and DFX 100 Rx Front Panel
a Front Panel LED — lights amber if the unit (transmitter or receiver) is receiving power
from the 12 VDC power supply. The Transmitter LED lights green if the unit is receiving
a TMDS clock signal. The Receiver LED lights green if the unit is receiving an optical
signal.
NOTE: During initialization, the LED may need a few seconds to stabilize to the
correct state.
DFX 100 Tx Rear Panel
POWER
12V
1.0 A MAX
OUTPUT
INPUT
DFX 100 Tx POWER
12V
1.0 A MAX
OUTPUT
INPUT
DFX 100 Tx a
c
b
3 feet (0.91 m) DVI cable
Figure 3. DFX 100 Tx Rear Panel