Reference information, Specifications – Extron Electronics DTP HDMI 301 User Guide User Manual

Page 18

Advertising
background image

Reference

Information

This section discusses the specifications, part numbers, and accessories for the
DTP HDMI 301 Tx/Rx transmitter and receiver. Topics that are covered include:

Specifications
Part Numbers and Accessories
Mounting the Transmitter or Receiver

Specifications

NOTES

:

This product consists of a transmitter (DTP HDMI 301 Tx) and a receiver (DTP HDMI 301 Rx), sold

separately, with twisted pair cables linking the transmitter and receiver.

*Appropriate HDMI to DVI-DI cables or adapters are required for DVI signal input/output

.

Video

Maximum data rate ........................ 6.75 Gbps (2.25 Gbps per color)
Maximum pixel clock ...................... 165 MHz
Resolution range ............................ Up to 1920x1200 or 1080p @ 60 Hz; 8, 10, or 12 bit color depth
Formats .......................................... RGB and YCbCr digital video
Standards ....................................... DVI 1.0, HDMI 1.3

Video input — transmitter

Number/signal type ........................ 1 single link HDMI (or DVI-D*)
Connectors .................................... 1 female HDMI type A

Interconnection between transmitter and receiver

Connectors .................................... 2 female RJ-45 per unit for 2 cables connecting the transmitter and receiver

TP1 output transmits digital video, embedded digital audio, RS-232, IR, and
remote power.
TP2 output transmits analog stereo audio.

Termination standards .................... TIA/EIA T568A or T568B
Signal transmission distance ........... 330' (100 m) using CAT 5e/6 UTP or STP cable

Video output — receiver

Number/signal type ........................ 1 single link HDMI (or DVI-D*)
Connectors .................................... 1 female HDMI type A

Audio

Gain ............................................... Unbalanced output: 0 dB; balanced output +6 dB
Frequency response ........................ 20 Hz to 20 kHz, ±0.05 dB
THD + Noise ................................... 0.03% @ 20 Hz to 20 kHz at maximum output
S/N ................................................. >90 dB, at maximum output (15 dBu), balanced (unweighted)
Stereo channel separation .............. >80 dB @ 1 kHz to 20 kHz

DTP HDMI 301 • Reference Information

12

Advertising