Extron Electronics FOX 3G DVC User Guide - Manual (Page 14)

FOX 3G DVC • Installation 8
Connecting to the USB Config Port
The mini Type B USB Config port is located on the DVC front panel. It can be used to
configure the converter via SIS commands.
1. Use a USB A-to-mini-B cable to connect the DVC USB Config port to a USB port on your
computer.
USB Cable
Type A
USB
Mini Type B
USB USB 1
USB
Ports
Computer
Converter Front Panel
Extron
NEXT
MENU
FOX 3G DVC
DIGITAL VIDEO CONVERTER
ADJUST
CONFIG
Figure 6. Connecting to the Config Port
2. If this is the first time you have connected a FOX 3G DVC to this particular USB port
on your computer, the Found New Hardware Wizard opens. On the first screen, specify
whether you want the computer to connect to Windows
® Update in order to search the
web for the driver that it needs to communicate with the DVC via the USB port (this is
not necessary if the USB driver already exists on your computer).
Figure 7. Found New Hardware Wizard Opening Screen