Extron Electronics FOX 500 DA6 User Guide - Manual (Page 27)

FOX 500 DA6 • Remote Control
Remote Control, cont’d
3-24 FOX 500 DA6 • Remote Control 3-25
Figure 3-9 — Open window
a . Click Browse. The open file window appears.
b . Navigate to the folder where you saved the firmware
upgrade file in step 1. Select the file. The Firmware
Loader returns to the top.
N Valid firmware files must have the file extension “.BIN”.
A file with any other extension is not a firmware upgrade
for your FOX 500 DA6.
c . Click Upload. The File Loader reports, "This process
could take several minutes. Please wait... " and then
displays a scroll bar that shows the status of the
upload.
d . When the Firmware Loader reports, "Transfer complete!",
click the Exit button.
6 . Cycle the DA unit's power.
7 . If necessary, repeat this entire procedure on receivers in the
system.