Extron Electronics FOX T UWP 302 User Guide User Manual
Page 26
Command
ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Internal temperature
View internal temperature
20S
X!]
Internal temperature in
degrees Fahrenheit and
Celsius.
Factory reset
System reset (factory default)
E
ZXXX
}
Zpx
]
Resets unit to factory
default (see
on page 12).
Reset audio gain and
attenuation
E
ZA
}
Zpa
]
Reset audio gain and
attenuation to default levels.
Upload firmware
Upload firmware
E
Upload
}
SendHeader
]
SFP module
View SFP module information
40S
X1*•X1(•X2)•X2!]
NOTE:
X!
= Internal temperature
X1*
= Vendor or manufacturer name
X1(
= Transmit (Tx) output power in dBm
X2)
= Receive (Rx) optical power in dBm
X2!
= Operation temperature of the SFP modules in degrees Celsius
FOX T UWP 302 Wallplate Transmitter • SIS Configuration and Control
20