Extron Electronics FPC 5000 - Manual (Page 56)

Matrix 12800 Operation, cont’d
FPC 5000 Front Panel Controller • Matrix 12800 Operation 3-36
Reset screen
Personnel logged in as users can reset all current ties and all mutes. All other
selections are reserved for administrators only.
The Reset screen (figure 3-23) provides several different Matrix 12800 reset
functions, that allow you to clear specific areas of the switcher.
Figure 3-23 — Reset screen
Access the Reset screen by touching the blue Setup > cyan Reset buttons.
Only the Current Ties button and Mute Settings button function for
personnel logged on as Users.
The following Matrix 12800 system resets are available:
Global presets — Resets (clears) all global presets.
Room presets — Resets (clears) all room presets.
Current ties — Resets (clears) all current ties.
Mute settings — Resets (unmutes) all video and audio mutes.
RGB delay — Resets (zeroes) all RGB delays.
Audio settings — Resets (clears) all audio gain and attenuation settings.
Factory defaults — Resets the switcher to factory defaults. Leaves virtualization
and room mapping intact.
Blank button
Reserved for future use.