Extron Electronics DVI 110 User Guide - Manual (Page 16)

DVI 110 • Reference Information 10
Mounting the DVI 110
The DVI 110 can be mounted on a rack shelf or under furniture, or it can be placed on a
table top. Extron has a variety of optional rack shelf and furniture mounting kits that can
be used with the DVI 110. See "
Optional Accessories " in the "Reference Information"
section for information on the mounting products available for the DVI 110.
Tabletop Use
Four self-adhesive rubber feet are included with the DVI 110. For tabletop use, attach one
foot at each corner on the bottom surface of the unit.
Rack Mounting
UL rack mounting guidelines
The following Underwriters Laboratories (UL) guidelines apply to the safe installation of
the equipment in a rack.
1. Elevated operating ambient temperature — If the equipment is installed in
a closed or multi-unit rack assembly, the operating ambient temperature of the rack
environment may be greater than room ambient temperature. Therefore, install the
equipment in an environment compatible with the maximum ambient temperature
specified by Extron (Tma = +122 °F, +50 °C).
2. Reduced air flow — Install the equipment in a rack so that the amount of air flow
required for safe operation of the equipment is not compromised.
3. Mechanical loading — When mounting the equipment in the rack, ensure that
uneven mechanical loading does not cause a hazardous condition.
4. Circuit overloading — When connecting the equipment to the supply circuit,
consider the effect that circuit overloading might have on overcurrent protection
and supply wiring. Consider the equipment nameplate ratings when addressing this
concern.
5. Reliable earthing (grounding) — Maintain reliable grounding of rack mounted
equipment. Pay particular attention to supply connections other than direct
connections to the branch circuit (for example, use of power strips).