Extron Electronics DTP T UWP 232_332 D User Guide - Manual (Page 13)

DTP T HWP/UWP 232/332 D Transmitters • Installation and Operation 7
Final Installation
After testing and making any adjustments, do the following:
1. At the power outlet, unplug the power supply.
NOTE: One power supply can power both the transmitter and the receiver (see
Power Supply Wiring on page 13).
2. Mount the transmitter into the wall box or mud ring and attach the supplied Decora
faceplate to the unit (see
figure 2 on page 5).
3. At the power outlet, reconnect the power supply. This powers up both units.