Extron Electronics IN3254 User Guide - Manual (Page 10)

IN3254 • Introduction
Introduction, cont’d
1-6
Sync Level: Set this switch to adjust the
sync
portion of the video with the sync signal.
HI
— Applies 5 volts peak-to-peak.
LOW — Applies 3 volts peak-to-peak.
N Adjustments apply to all four
outputs.
Input and output connections
RGB and component video inputs — Connect an RGBHV,
RGBS, RGsB, RsGsBs component video, S-video, composite
video source to these BNC connectors.
RGB and component video outputs
— Connect RGB or
component video displays or other devices to these BNC
connectors for each video output.
Connect the cables for the desired input or output signal, as
shown below.
R
G
B
H
V
RGBHV RGBS
RGsB,
RsGsBs,
Component
S-Video Composite
N When making connections, ensure that inputs and
outputs are using the same signal (e.g., S-video BNCs
are connected on both input and output connectors).
X1.3
S
Y
N
C
L
E
V
E
L
V
ID
E
O
G
A
IN
X1
HI
LOW
X1.3
S
Y
N
C
L
E
V
E
L
V
ID
E
O
G
A
IN
X1
HI
LOW