Extron Electronics IN3058 User Manual
Page 8
4
IN3056 / IN3058 OPERATION MANUAL - REV. 2.3 02/19/00
©1996-1997 - INLINE, INC.
SPECIFICATIONS
IN3056
1 x 4 S-Video Dist. Amp.
IN3058
1 x 8 S-Video Dist. Amp..
Input
Connector type
(1) 4-Pin Mini DIN
Chroma / Luma Signals
Analog, 1.5V p-p max., 75 ohm impedance
Output
Connector Type
(4) 4-Pin Mini DIN
(8) 4-Pin Mini DIN
Y/C Signals
Analog Video, 75 ohm impedance
Bandwidth
100 MHz @ -3 dB
Rise and Fall Times
3.5 nano seconds
Controls
Chroma Gain
Adjustable: 0.9 to 1.5
Luma Gain
Adjustable: 0.9 to 1.5
Dimensions
Size
1" H x 3.5" W x 2.75" D
1" H x 7.75" W x 4" D
Weight
1 lb.
1 lb.
Power Consumption
9V 200 mA
9V 200 mA
Accessories Included
IN3056 Distribution Amplifier
9V 200 mA Power Supply
Operations Manual
IN3058 Distribution Amplifier
9v 200 mA Power Supply
Operations Manual
Optional Accessories
IN9093 Input/Output Adapter, 4-Pin Mini DIN Male to (2) BNC Female
TROUBLESHOOTING
Problem:
There is no image on the output of the IN3056/3058.
Suggestions:
●
Make sure the power supply is plugged in. Verify that the input and output cables are
connected and properly seated in the input and output connectors.
●
Bypass the IN3056/3058 to ensure there is a video signal present.
Problem:
The output image is too dark.
Suggestion:
●
First make sure the display device contrast and brightness controls are set properly.
Then increase the appropriate IN3056/3058 Luma gain control(s) until the desired image
is achieved.
Problem:
The output image is too bright or the picture blooms.
Suggestion:
●
First make sure the display device contrast and brightness controls are set properly.
If necessary, adjust the appropriate IN3056/3058 output Luma gain control(s) until the
desired image is achieved.