Extron Electronics IN2118 - Manual (Page 21)

19
©2001 - Inline, Inc. IN2118 Operation Manual - Preliminary 01/31/01
Specifications
IN2118 Installation Video Interface
Input (IN2118-A, D & G only)
Connector Type
(1) 15-pin HD female
RGB Video Signals Analog, 1.5 Vp-p max.
Sync Signals TTL compatible
Horizontal Scan Rate 30 KHz - 130 KHz
Vertical Sync Range 30 Hz - 120 Hz
Stereo Audio Connector (1) 3.5mm stereo mini female
Stereo Audio Signal Unbalanced Stereo Audio - Impedance: 10 K
Ÿ
Output (IN2118-A, D & G only)
Local Monitor (Buffered)
(1) 15-pin HD female
Main Outputs 1 or 2 sets of 5 female BNC - Located on Bottom of Unit
Output Sync Format RGBHV, RGBS or RGsB format
Bandwidth 400 MHz @ -3 dB with 0.7 volt input signal
Balanced Audio Outputs (2) 5-pin Captive Screw Connectors, Impedance: 50
Ÿ
Controls (IN2118-A, D & G only)
External
Horizontal Position Control
Internal 10 Dip Switches
Dimensions
Overall Including Flange
14” x 12.15” x 11.15” / 35.6 cm. x 30.9 cm. x 28.3 cm.
(see the Dimensions Diagrams on pages 22-24)
Interface Top Plate 8.15” x 9.15” / 20.7 cm. x 23.2 cm.
Interface Elevation Rises approximately 3.4” / 8.64 cm. above top of table
Shipping Weight 20 lbs. / 9 Kg.
Product Weight 15 lbs. / 6.8 Kg.
Power
Power Supply
Internal Switch Mode: 90 to 260 VAC; 47 - 63 Hz
General
Paint Finish
Black
Front Panel A/C Outlets 1 or 2 Edison / IEC / Europlug Female - 800 Watts Max.
Remote Control 4-pin Captive Screw - Contact Closure Type
Regulatory Compliance
EMI & Safety
UL 1950, CAN/CSA-22.2 No. 950 3
rd
Ed.
FCC class A; CE: EN50022 (1987), EN50081-1 (1991),
EN50082-1 (1992 & 1994), EN60950-92
Parts Included
(1) IN2118 Installation Unit
(1) IN9230 IEC Power Cable, 6’ long (USA only)
(1) IN9334 3/32” Allen Wrench
(1) IN9339 Adjustment Tool with Technician’s Blade
(1) Operation Manual