Using the software, Using the software -4, Ism 824 multiswitcher software, cont’d – Extron Electronics ISM 824 User Manual

Page 116

Advertising
background image

ISM 824 Multiswitcher Software, cont’d

ISM 824 Integration Scaling Multiswitcher • ISM 824 Multiswitcher Software

5-4

Using the software

The items found in the ISM 824 Control Program are also accessible via front panel

controls (s

ee chapter 3, “Operation and Setup”

) and under SIS

™

control

(see chapter 4, “SIS

™

Programming and Control”

). The ISM 824 Help Program

provides information on settings and how to use the control program itself.

Use the software as follows:

1.

To run the ISM 824 Control Program, either double-click the

desktop icon (if installed) or select Start > Programs > Extron

Electronics >ISM 824 > ISM 824.

One of two Connect Type selection windows appears (see figure 5-4).

or

Figure 5-4 — Connection type selection windows

2

.

If the preferred window is not showing, click the other tab to make it

available:
• TCP/IP tab (used for connection via the LAN port — proceed to step 3),

or

• RS-232 tab (used for connection via the rear panel RS-232/422 port or

front panel Configuration port — proceed to step 4).

3

.

If connecting by TCP/IP

:

a

. Observe the Extron IP Address and Telnet Port fields in the IP Connection

window. The field displays the last Extron IP address and Telnet Port

entered.

N

If the local system administrators have not changed the value, the factory-

specified default, 192.168.254.254, is the correct value for this field.

If the IP Address and Telnet fields are correct

, proceed to step 3b.

If the address is not correct,

click in the IP Address field and enter the

IP address.

If the Telnet Port is not correct, c

lick in the Telnet field and enter the

Telnet Port number. Proceed to step 3b.

N

If the local system administrators have not changed the Telnet Port value, then

23 is the correct value for this field.

b

. If the switcher is password protected, click in the Password field and

enter the appropriate administrator or user password.

c

. Click Connect.

N

If you logged on using the administrator password, the Windows program

connects you to the ISM 824 multiswitcher with all of the administrator rights
and privileges.

Advertising