Extron Electronics MSG0808 - Manual (Page 44)

MSG Matrix Switchers • Specifications
Specifications
A-2
Video
Routing
MSG0804-3, MSG0804-4,
MSG0804HR-3,
MSG0804HR-4 .................. 8 x 4 matrix
MSG0808-3, MSG0808-4,
MSG0808HR-3,
MSG0808HR-4 .................. 8 x 8 matrix
Gain ............................................... Unity (with 75 ohm termination)
Bandwidth
MSG0804-3, MSG0804-4,
MSG0808-3, MSG0808-4 .. 225 MHz (-3dB), fully loaded
MSG0804HR-3,
MGS0804HR-4,
MSG0808HR-3,
MSG0808HR-4 .................. 475 MHz (-3dB), fully loaded
Differential phase error .............. 0.05º at 3.58 MHz and 4.43 MHz
Differential gain error ................. 0.1% at 3.58 MHz and 4.43 MHz
Crosstalk ....................................... -60dB @ 5 MHz
Switching speed ........................... 50 ms (max.)
Video input
Number/signal type ................... 8 RGBHV, RGBS, RGsB, RsGsBs, component video (YUV; YPrPb; Y, R-Y,
B-Y), S-video, composite video
Connectors .................................... 8 x 5 female BNC
Nominal level ............................... 1V p-p for Y of component video and S-video, and for composite video
0.7V p-p for RGB
0.3V p-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels ...... Analog: ±1.5V p with no offset at unity gain
Impedance .................................... 75 ohms
Return loss .................................... <-60dB @ 5 MHz
Maximum DC offset .................... (Note: Min/max levels include any DC offset)
External sync (genlock) ............... 2.0V to 5.0V p-p
Video output
Number/signal type
MSG0804-3, MSG0804-4,
MSG0804HR-3,
MSG0804HR-4 .................. 4 RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, composite video
MSG0808-3, MSG0808-4,
MSG0808HR-3,
MSG0808HR-4 .................. 8 RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, composite video
Connectors
MSG0804-3, MSG0804-4,
MSG0804HR-3,
MSG0804HR-4 .................. 4 x 5 female BNC
MSG0808-3, MSG0808-4,
MSG0808HR-3,
MSG0808HR-4 .................. 8 x 5 female BNC