Windows menus, Windows menus -17, Remote control, cont’d – Extron Electronics MMX 42_62 Series User Guide User Manual

Page 24

Advertising
background image

MMX 42/62 Series Matrix Switchers • Remote Control

Remote Control, cont’d

4-16

MMX 42/62 Series Matrix Switchers • Remote Control

4-17

7

7

Figure 4-13 — Choose Firmware File window

7

.

Navigate to and select the new firmware file. Click Open.

The Choose Firmware File window closes.

N

When downloaded from the Extron Web site, the firmware is

placed at C: Program Files\Extron\Firmware\MMX4262.

C

The firmware file must have a .s19 extension. Other

file types can cause the switcher to stop functioning.

8

.

In the Firmware Loader window, click Begin (figure 4-14).

The Total Progress and Progress status bars show the

progress of the upload. The firmware upload to the

switcher may take several minutes. Once the status bars

have progressed from 0% to 100%, and Status is listed

as Complete, the firmware loader utility resets the switcher.

Figure 4-14 — Firmware Loader screen

9

.

Click Exit to close the Firmware Loader.

Windows menus

File menu

Save Communications Log ...

—

Opens a Save Log window

that allows you to save all SIS

commands from the current

session to a text (*.txt) file.

Print Preview Communications Log ...

—

Opens a window that

presents a preview of a printed log of all SIS commands

from the current session.

Print Communications Log ...

—

Prints all SIS commands from

the current session.

Exit

— Closes the Universal Switchers Control Program.

View menu

Display

—

Allows you to select

between horizontal

(figure 4-5) and vertical

(figure 4-15) display of the

input and output selection

window. These selections

are also available via the tool bar's Horizontal button (

)

and Vertical button (

).

Figure 4-15 — Vertical display

Features View

—

Allows you to select which field, Unit Info, or

A/V Mute, Gain/Attenuation to display as the default

field in the top right of the Universal Switcher Control

Program window.

Communications Log View

—

Opens the communications log if

it is not already open. This selection is also available via

the tool bar's Communications Log View button (

).

Command Prompt ...

— Opens an MS-DOS window.

Advertising