Example 7: recall a preset – Extron Electronics MVX 44_48_84_88 Series User Guide User Manual
Page 28
Example 7: Recall a preset
The following steps show an example in which a preset is recalled to become the current
configuration. The example shows the front panel indications that result from your actions.
1.
Select Recall Preset mode: Press and release the Preset button.
PRESET
2
1
4
3
OUTPUTS
2
4
1
INPUTS
3
Press and release the button.
The LED lights to indicate Recall Preset mode.
2
3
4
5
6
7
8
1
All input and output buttons with assigned presets light. If you then recall the configuration
from an
unlit preset number, all ties will be cleared.
Preset:
2.
Select the preset: Press and release the input button or output button for the desired
preset.
2
1
3
2
1
INPUTS
3
PRESET
3
4
OUTPUTS
Press and release the Input 1 button to select
preset 1.
Preset 2 Preset 3
The LED for the recalled preset and the Preset LED
remain lit for 1 second then go out.
All LEDs except the recalled preset's LED go out.
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Operation
22