Extron Electronics MLC 52 Series User Guide - Manual (Page 35)

MLC 52 RS MK VC MLC 52 RS MK
MLC 52
ON
PC
OFF
VIDEO
VOL
VOL
3
2
1
4
VOLUME
MLC 52
ON
PC
OFF
VCR
DVD
3
2
1 5
Figure 24. MLC 52 RS MK and MLC 52 RS MK VC Front Panels
MLC 52 RS EU VC MLC 52 RS EU
MLC 52
ON
PC OFF VIDEO
VOL VOL
1 2
4
3
MLC 52
ON
PC
DOC
CAM
OFF
VIDEO DVD
1 3 5 2
Figure 25. MLC 52 RS EU and MLC 52 RS EU VC Front Panels
a
Display power buttons — The display power buttons turn power to the projector or
display on and off. Because the display device can be only on or off at a given time,
these buttons are programmed in an exclusive switch group.
NOTE: A 2-second hold feature, requiring you to press and hold the Off button
for 2 seconds in order to turn off the display device, helps prevent accidental
powering off of the projector or display. This feature can be disabled and
enabled through the configuration software (see the MLC 52 Configuration
Program help file for further information).
b
Input selection buttons — These buttons are preprogrammed to select input
sources. By default, they are in input mode; that is, only one of them can be selected
at a time. If you want these buttons to operate independently of each other, use the
MLC 52 configuration software to remove the group configuration from them and
change to single switch mode.
MLC 52 MediaLink Controllers • Operation 29