Extron Electronics PowerCage FOX Tx_Rx AV User Guide - Manual (Page 40)

5. The Choose Firmware File window opens.
Figure 27. Choose Firmware File Window
6. Navigate to and select the new firmware file, which has a .bin extension, and click
Open . The Choose Firmware File window closes.
CAUTION: The firmware file must have a .bin extension. Uploading other file
types can cause the switcher to stop functioning.
NOTE: When downloaded from the Extron website, the firmware is placed
in a subfolder of C:\Program Files\Extron\Firmware or
C:\Program Files (x86)\Extron\Firmware (for Windows 7).
7. In the Firmware Loader window, click Begin .
The Total Progress and Progress status bars show the progress of the firmware upload.
The upload to the switcher may take several minutes. After the status bars have
progressed from 0% to 100%, and Status is listed as
Completed , the firmware loader
utility resets the unit.
7
Figure 28. Progress Status Bars on the Firmware Loader Screen
8. Click Exit to close the Firmware Loader.
PowerCage FOX Tx/Rx AV • Remote Communication and Control 34