Braun FG1100 Silk-épil - Manual (Page 5)

4
zone trimming combs (3a, 3b). To attach
a trimming comb, slide the pointed side
over the cutting element, then press the
round side onto the bikini zone cutting
head so that it snaps into place (d). Guide
the appliance with the trimming comb flat
against the skin.
Cleaning and maintenance
Always turn off the appliance before
cleaning. Clean the appliance after each
use:
• Use the brush (6) to wipe away any hair
or dust.
• From time to time, you can rinse the
detached cutting heads under warm
running water. A natural soap may
also be used, provided it contains no
particles or abrasive substances. Rinse
off all foam.
• Please ensure that the cutting head is
completely dry before attaching to the
body
• For storage, attach the protective cap
(1).
We recommend lubricating the cutter
element in the head with a drop of light
machine oil twice a year or after cleaning
with tap water.
Subject to change without notice.
At the end of their life, empty
batteries and the appliance
should not be thrown away with
the general waste or rubbish.
Please dispose of them at a Braun
Service Centre or at an appropriate
collection point.
99697001_FG1100_NA 4 99697001_FG1100_NA 4 25.10.10 10:20 25.10.10 10:20