Extron Electronics TLP 700TV User Guide - Manual (Page 33)

2. Select Create A New Project and click OK. The dialog box closes, leaving the
Project Settings screen.
Figure 25. Global Configurator Project Settings
3. Enter the IP Address for the TLP 700MV panel.
The default Telnet connection is port 23 and HTTP is port 80, so these values do not
usually need to be changed.
If necessary, set administrator and user passwords.
If required, set the date and time.
Leave the Set Device as GlobalViewer Host box checked.
TLP 700MV and TLP 700TV • Control Software 27