Specifications, Video, Video input and loop through – Extron Electronics RGB 400xi Series User Guide User Manual

Page 24: Video output

Advertising
background image

RGB 460xi Series • Specifications, Parts, and Accessories

A-2

Specifications

Video

Gain ...............................................

Unity (0.7V), 15% with 3dB peaking (0.8V), 30%
with 6dB peaking (0.9V)

Bandwidth ............................................ 300 MHz (-3dB)

Video input and loop through

Number/signal type

RGB 460

xi Dual ...................... 2 analog RGBHV, RGBS, RGsB

All other models .................... 1 analog RGBHV, RGBS, RGsB

Connectors

RGB 460

xi /460xi EC/460xi FSR/464xi/468xi/468 Mxi/468xi EC/

468

xi AKM UK ....................... (1) 15-pin HD female buffered input connector

and
(1) 15-pin HD female local monitor loop
through connector

RGB 460

xi Dual ...................... (2) 15-pin HD female buffered input connectors

and
(2) 15-pin HD female local monitor loop
through connectors

Nominal level ...................................... 0.7V p-p for RGB
Minimum/maximum levels .............. Analog: 0.3V to 1.45V p-p with no offset at

unity gain

Impedance ............................................ 75 ohms or Hi Z, switchable (set to 75 ohms if

no local monitor is connected)

Horizontal frequency ......................... 15 kHz to 150 kHz (optimum 15 kHz to 62

kHz)

Vertical frequency ............................... 30 Hz to 170 Hz
Return loss ........................................... <-30dB @ 5 MHz

Video output

Number/signal type

RGB 460

xi Dual ...................... 2 separate analog RGBHV, RGBS, RGsB

All other models .................... 1 analog RGBHV, RGBS, RGsB

Connectors

RGB 460

xi Dual ...................... 2 x 5 BNC female on 2” to 2.5” cables

All other models .................... 5 BNC female on 2” to 2.5” cables

Nominal level ...................................... 0.7V p-p for RGB
Minimum/maximum levels .............. Analog: 0.7V to 0.9V p-p (switch selectable) w/

peaking and 0.7V p-p input

Impedance ............................................ 75 ohms
Return loss ........................................... <-30dB @ 5 MHz

Advertising