Arcam FMJ MS250 - Manual (Page 10)

MS250
10
�
����� � � �
���� � � �
� � �
������
���� ����
����
����� ������ ����� ����
�� ����� ������ ������
��� ��� �
��� ��� ���
���� ��� ����
��
Using the CR-425 remote control
DISP (display)
Cycles the brightness of the front panel display.
There are several brightness levels to choose
from, including switching the display off.
Record
Press this button to begin recording a CD to
hard drive or recording line input..
0–9 keypad
This allows text entry of characters and numbers,
as on a mobile phone. In character mode, use
0 to
input a space character.
Genre, Artists, Album or Track lists may be filtered
(i.e. reduced) by requiring a match with the first
character entered.
Back
Use this key to navigate back to the previous menu page.
The key is also used to delete characters when editing
text entries.
MUTE
Stops sound output of the currently selected zone.
Volume +/–
Adjusts the volume (output level) of the currently
selected zone.
OPEN
Opens and closes the disc tray.
Page Up/Down
Scrolls through long lists a page at a time.
Cursor pad and OK button
Use the cursor pad to navigate within a menu page.
Confirm your selection with the
OK button.
Playback control
Pause ( ; ), Play ( 4 ) and Stop ( < ).
Fast play and Skip track
Play fast ( 7 8 ) and Skip tracks
( 0 / ) in both directions.
Source selection
Press these buttons to select the internal
CD player, Internet radio, or the devices
connected to the AUX 1 or AUX 2 inputs.
Standby
Press Standby to toggle the standby state of the MS250.
ZONE
Press ZONE to cycle through a display of what each zone
is currently playing.
SETUP
Press this button to access the
MS250’s ‘Setup’ menu.
HOME
Press this button to access the
MS250’s Home menu.
Menu shortcuts
Press these buttons to navigate directly to the
appropriate menu when choosing stored music.
Normal/Caps/Numbers shift
Press to change alphanumeric setting when entering text.
Red
If a CD is in the tray then this closes the tray
and records the CD to hard drive and plays
the CD at the same time.
Blue
Go to ‘Now Playing’ screen.
Green
If a CD is in the tray then this closes the tray
and plays the CD without identifying it first.
Yellow
Toggles the on screen display on/off.
TIP
If the remote control receiver
(located on the right of the front-
panel window) is not ‘visible’ to the
remote control hand-set, then the
remote control will not work! Either
locate the unit elsewhere, or take
advantage of the remote control
input on the rear of the player. See
your dealer for further information
on this option.