Extron Electronics SGS 408 DVI User Guide User Manual
Sgs 408 dvi connector, User’s guide, Part numbers
User’s Guide
© 2006 Extron Electronics. All rights reserved.
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
USA
714.491.1500
Fax 714.491.1517
Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040
Fax +31.33.453.4050
Extron Electronics, Asia
135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400
Fax +65.6383.4664
Extron Electronics, Japan
Kyodo Building
16 Ichibancho
Chiyoda-ku, Tokyo 102-0082 Japan
+81.3.3511.7655
Fax +81.3.3511.7656
www.extron.com
70-122-01 Upgrade Kit
68-535-01 Rev. C
06 06
SGS 408 DVI Connector
5.
Attach the power cord to the SGS 408 and to the AC power
source. Make sure the SGS 408 is working correctly.
6.
If the SGS 408 is rack mounted, remove the power cable
from the SGS 408 and reattach the SGS 408 to the rack.
Reconnect the power cord and the input and output cables.
Part Numbers
Related part numbers
Extron Part
Part Number
DVI transmitter and DVI receiver
60-316-02