Extron Electronics SGS 408 User Guide User Manual

Page 35

Advertising
background image

3-17

SGS 408 Switcher • Operation

• A standard wipe causes the preview image to appear to unroll over the

program image horizontally or vertically. A standard wipe can have either
hard (sharp) or soft (fuzzy) edges. The preview image can have the
following transitions (figure 3-32):

•

From left to right

•

From right to left

•

From top to bottom

•

From bottom to top

Figure 3-32 — Standard wipe transitions

• A curtain wipe causes the preview image to appear to unroll over the program

image in two directions simultaneously. A curtain wipe can have either
hard (sharp) or soft (fuzzy) edges. The preview image can have the
following transitions (figure 3-33):

•

In from the left and right edges of the screen to the center of the screen

•

Out from the center of the screen to the left and right edges of the screen

•

In from the top and bottom edges of the screen to the center of the
screen

•

Out from the center of the screen to the top and bottom edges of the
screen.

Figure 3-33 — Curtain wipe effects

• A plus wipe causes the preview image to appear to unroll over the program

image in one of two transitions (figure 3-34):

•

Starting in all four corner of the screen and moving in to the center of
the screen.

•

Starting at the center of the screen and moving out to the corners of the
screen.

Figure 3-34 — Plus wipe effects

left to right

right to left

top to bottom bottom to top

Advertising