Gotham 4 DLV Adjustable Downlight SpecSheet User Manual
4” dlv
Luminaire Type:
Catalog Number
(autopopulated):
© 2007-2014 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 03/25/14. Specifications subject to change without notice.
PAGE 1 OF 3
DLV-4-ADJ-OPEncOnE
Gotham Architectural Downlighting
Low Voltage Downlights
4” DLV
Adjustable Downlight
Open Cone
Max 75 Watt
FE
AT
U
RE
S
OR
DER
ING
IN
FO
RM
AT
ION
N
OT
ES
OPTICAL SYSTEM
•
Internal housing components painted matte black. Lamp snoot minimizes stray
light in housing.
•
Self-flanged, semi-specular, matte-diffuse or specular cone with flange that
matches cone finish.
•
Optical system is retained by self-aligning, torsion support springs.
•
Tool-less, 0°-45° vertical adjustment and 355° horizontal adjustment.
•
Designed to allow hot aiming.
•
Adjustment mechanism is lockable to maintain aiming during re-lamping.
•
Accommodates up to two lenses, filters or louvers.
•
Softening lens standard.
MECHANICAL SYSTEM
•
Black painted housing features tool-less top access and accommodates a
maximum 1-1/2” ceiling thickness.
•
Re-lamp capability from above or below ceiling.
•
16-gauge galvanized steel mounting bars with continuous 4” vertical adjust-
ment are shipped pre-installed. Post installation adjustment possible without
the use of tools above or below ceiling.
•
Secondary housing adjustment system for precise, final flange to ceiling
alignment.
•
Galvanized steel junction box with hinged access covers and spring latch. Four
combination 1/2”-3/4” knockouts for straight-through conduit runs. Capacity: 8
(4 in, 4 out) No. 12 AWG conductors rated for 90°C.
ELECTRICAL SYSTEM
•
Tool-less access door provides access to junction box through the aperture.
•
Replaceable socket assembly. MR16 socket assembly standard.
•
12-volt electronic transformer is replaceable without the use of tools.
•
Thermally-activated insulation detector is replaceable without the use of tools.
LISTING
•
Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed an labeled to comply with Canadian standards.
WARRANTY
•
1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: DLV ADJ MR16 4BCT30 120
Series
Configuration Wattage/Lamp
Aperture/Trim color
Type
Finish
Voltage
Options
DLV
ADJ
MR16
MR16 capability
(standard)
MR11
MR11 capability
ALR12
ALR12 capability
ALR18
ALR18 capability
AR70
1
AR70 capability
4AC
clear
4BC
2
Black
4PC
Pewter
4WTC
Wheat
4GC
Gold
4WC
2
White painted
4MB
2
Black baffle
4WB
2
White baffle
T30
cut for angles
25°-40°
T20
cut for angles
15°-25°
T00
cut for angles
0°-15°
(blank)
Semi-
specular
LD
Matte-
diffuse
LS
Specular
120
277
347
TRW
White painted flange
(Standard with Wc,
MB, and WB.)
TRBL
Black painted flange
RRL
3
RELOc
®
-ready
luminaire. Provides
compatibility with Li-
thonia RELOc System.
Access above ceiling
required
SF
Single fuse
ACCESSORIES order as separate catalog numbers (shipped separately)
•
ORDERING NOTES
1.
Clear safety glass standard with AR70 lamp designation.
2.
Not available with finishes.
3.