Gotham 12 LAH Square Lens FHL SpecSheet User Manual
12” lah
Luminaire Type:
Catalog Number
(autopopulated):
© 2003-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 12/05/13. Specifications subject to change without notice.
PAGE 1 OF 3
LAH-12-SquARE-FHL
Gotham Architectural Downlighting
HID Downlights
12” LAH
Square Lens
Holophane Control Lens, Wet Location,
Horizontal Lamp, Metal Halide or HPS Lamps
FE
AT
U
RE
S
OR
DER
ING
IN
FO
RM
AT
ION
N
OT
ES
OPTICAL SYSTEM
•
Diffused anodized aluminum reflector.
•
Flat Holophane Controlens.
DOOR
•
Die-cast aluminum, gasketed door frame available in flush white or regressed
stepped baffle.
•
Self-aligning butterfly door support springs.
MECHANICAL SYSTEM
•
Die-formed steel upper housing with white polyester powder paint and formed
steel lower housing with matte black finish.
•
Expandable mounting bars provide horizontal and vertical adjustment.
•
Galvanized steel junction box with bottom-hinged access covers and spring
latches. Two combination 1/2”-3/4” knockouts and three 1/2” knockouts for
straight-through conduit runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors
rated for 90°C.
ELECTRICAL SYSTEM
•
Horizontally-mounted, mogul-base porcelain socket with nickel-plated screw shell.
•
Prewired HPF core-and-coil ballast.
•
Thermally-activated insulation detector.
LISTING
•
Fixtures are UL listed for thru-branch wiring, recessed mounting and wet
locations. Listed and labeled to comply with Canadian standards.
WARRANTY
•
1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: LAH 100M 12FW FHL 120
Series
Wattage/Lamp
Door frame
Lens type
Voltage
Options
LAH
Metal halide
100M
M100/C/u/MED
150M
1
M1500/C/u
175M
M175/C/u
250M
2
M250/C/u
Color-corrected metal halide
3
50MHC
MPC50/C/MED
70MHC
MPC70/C/MED
100MHC
MPC100/C/MED
150MHC
1
MPC150/C/MED
High pressure sodium
70S
Lu70/D/MOG
100S
Lu100/D/MOG
150S
Lu150/55/MOG
12FW Flush white
door
12SB
Stepped
black
baffle
FHL
Flat Holo-
phane lens
FFL
Flat Fresnel
lens
120
208
240
277
347
RRL
RELOC
®
-ready luminaire. Provides compatibility with Lithonia
RELOC system. Access above ceiling required.
TPS
Tamperproof (includes two tamperproof screws)
QRS
4
quartz Restrike System (uses D.C. base quartz lamp by others; see
other side for wattage restrictions)
QRSTD
4,5
quartz Restrike System with time delay
EC
4
Emergency circuit (D.C. base socket with leads for connection to
external emergency power source; see other side)
SF
Single fuse
DF
Double fuse (208V and 240V)
220/50HZ
Consult factory
HEB
6
Electronic ballast
EP
Encased and potted ballast
SCWA
Super CWA pulse start ballast
ACCESSORIES order as separate catalog numbers (shipped separately)
BH24
24” steel bar hangers (2) for T-bar mounting.
LSMC
Set of 4 T-bar mounting clips for use with bar hangers supplied with unit.(Not for use with BH24).
ORDERING NOTES
1.
California Title 20 compliant.
2.
250M available with encased-and-potted ballast; 120, 277 or 347 volts only.
3.
Ceramic arc tube consistent-color lamp. Philips MasterColor or GE ConstantColor.
4.
QRS, QRSTD and EC not available in combination.
5.
Luminaire dimensions increase to 24-3/4” x 17-1/2” x 6-5/8”.
6.
120 or 277V only. MHC lamps only.