Gotham 6 PDRGF Semi-recessed Glass Shade SpecSheet User Manual
6” pdrgf
Luminaire Type:
Catalog Number
(autopopulated):
© 2007-2014 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 01/07/14. Specifications subject to change without notice.
PAGE 1 OF 3
PDRGF-6-SHADE
Gotham Architectural Downlighting
Decorative Fluorescent Downlights
6” PDRGF
Semi-recessed Glass Shade
Triple-Tube and Double Twin-Tube Lamps
GLASS SHADE
•
Semi-recessed shade is pressed, colored glass with an acid etched exterior
finish and a matte white glazed interior décor. Available in white, amber or blue.
•
Minimum flange with textured polyester powder paint finish available in matte
white, matte black or satin silver.
MECHANICAL SYSTEM
•
16-gauge painted steel mounting/plaster frame with integral brackets to retain
glass shade. Maximum 1-1/2” ceiling thickness.
•
16-gauge galvanized steel mounting bars with continuous 4” vertical adjust-
ment are shipped pre installed. Post installation adjustment possible without
the use of tools from above or below ceiling.
•
Galvanized steel junction box with hinged access covers and spring latch. Two
combination 1/2”-3/4” and three 1/2” knockouts for straight-through conduit
runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90°C.
ELECTRICAL SYSTEM
•
Vertically-mounted, four-pin, positive-latch, thermoplastic socket.
•
Class P, thermally-protected, high power factor electronic ballast mounted to the
junction box.
LISTING
•
Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed and labeled to comply with US and Canadian standards.
WARRANTY
•
1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
EXAMPLE: PDRGF 18TRT 6WG DBLB MVOLT
Series
Wattage/
Lamp
Shade color
Flange color
Voltage
Ballast
Options
PDRGF
13DTT
13TRT
18DTT
18TRT
26DTT
26TRT
32TRT
6WG
White
glass
6AG
Amber
glass
6BG
Blue
glass
DWHG
Matte
white
DBLB
Matte
black
DNAS
Satin
silver
MVOLT
1
120
277
347
(blank)
Electronic ballast
ADZT
2
Advance Mark 7
®
electronic
0-10V dimming ballast
ECOS
2,3
Lutron EcoSystem
®
elec-
tronic dimming ballast
ADEZ
4
Advance Mark 10
®
electronic line-voltage
dimming ballast
DMHL3
4,5
Lutron Hi-Lume
®
1% elec-
tronic dimming ballast
ELR
2,6
Emergency battery pack. Remote test switch provided.
ELRHL
2,6
High lumen output emergency battery pack. Remote
test switch provided.
ELRSD
2,6
Emergency battery pack with self diagnostics. Remote
test switch provided.
ELRB94
2,6
Bodine B94 emergency battery pack. Remote test
switch provided.
BGTD
2,6
Bodine GTD™ generator transfer device
WLP
3500 K lamp (shipped separately)
RRL
7
RELOC
®
-ready luminaire. Provides compatibility with
Lithonia RELOC system. Access above ceiling required.
CP
Chicago plenum
NEPP
Interface for Sensor Switch
®
nLight
®
network with
integral power supply
GMF
4
Single, slow-blow fuse
GLR
4
Single, fast-blow fuse
FE
AT
U
RE
S
OR
DER
ING
IN
FO
RM
AT
ION
N
OT
ES
ORDERING NOTES
1.
Multi-volt electronic ballast capable of operating on any line voltage from
120V through 277V, 50 or 60 HZ.
2.
Not available with 347V.
3.
Not available with 13W.
4.
120V or 277V only.
5.
Available in 26W and 32W only.
6.
7.