Imetec BELLISSIMA B 100 - Manual (Page 15)

13 13
• after having selected the desired temperature, the
button lock can be activated by pressing the button
(5) twice and quickly. This function prevents accidental
temperature changes while using the straightener.
The activation of the button lock is signalled by the LED
(2) going on; the lock can be deactivated by pressing the
button (5) twice once again.
• The LED display (1) flashes until the plates reach the set
temperature.
Once the temperature is reached, the LED display (1)
remains on.
• Take a thin lock of hair, which is the same width of the
plate and not too voluminous, and place it between the
two plates.
• Keep the lock of hair taut with one hand and slide the
plate closed with the other hand, from the roots down to
the ends.
• Once the hair is styled, switch the appliance off by
keeping the button (5) pressed and disconnect the
appliance from the socket.
note: Steam can develop during straightening; this is
excess humidity in the hair that evaporates.
AUTOMATIC SWITCH-OFF
The straightener switches off automatically 1 hour after being
switched on.
CLEANING
Switch the appliance off by pressing the button (5) and
disconnect the plug (4) from the socket
• Wait for the plates (7) to cool down
• Clean the surface of the plates (7) and the handle with a
soft, damp cloth.
Make sure all cleaned parts are completely dry
before reusing the appliance!
En
MI000891_multi.indd 13 6/12/12 3:30 PM