Imetec ACQUA BLS 100 - Manual (Page 12)

GB
6
water system and the CO
2
cylinder must always be transported separately.
• Use only CO
2
cylinders at ambient temperature.
• NEVER gas an empty PET bottle or without having inserted the bottle filled with water at the level
indicated inside the sparkling water system.
• NEVER use deformed, faded or broken bottles.
• NEVER use bottles after the expiry date indicated on the back of the same bottle.
• CO
2
is pressurised inside the cylinder. Keep it in a cool place. Never expose it to direct sun light
or heat sources. Maximum temperature 50°C.
• NEVER freeze the CO
2
cylinder.
• NEVER freeze the water bottles.
• DO NOT shake the bottle after gassing. In case of pressure increase inside the bottle, slowly
open the same to decrease pressure.
• Use only PET IMETEC code 7729 bottles
• DO NOT tamper with the CO
2
cylinder
• Implement gassing only when the appliance is upright
• Never remove the bottle during gassing
ATTENTION!:
Keep the cap of the CO
2
cylinder in case of replacement or returning of the same.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
Consult the figures [Fig A-B-C-D-E] in the illustrations section to verify the packaging content.
All illustrations are in the cover pages:
1. Removable cover for cleaning of the bottle support
2. PUSH key
3. Support for PET bottle
4. Tube for gassing
5. PET bottle
a. Cap
6. Filling level
a. MIN level
b. MAX level
7. Rear cover
8. Release key
9. Connector
10. CO
2
cylinder
a. Seal
b. Cap
11. Connection hooks of the rear cover
12. Guide for CO
2
cylinder
MI000339.indd 6 08/07/10 16.41