En 13, Maintenance – Imetec ECO E1 User Manual

Page 15

Advertising
background image

EN

13

Medium:

ideal for cleaning sofas, armchairs, upholstered chairs, rugs and carpets.

Maximum: for smooth floors.
The suction power can also be changed by means of the manual adjusting device of the air
flow (2) found on the handle (1) [Fig. E2].
Closed: increases the suction power.
Open: reduces the suction power.
Open the adjustment device of the air flow to reduce the suction power if an object, which

¾·Й¸»»ДºИ·НДƑ¸ВЕ¹БЙК¾»ЕЖ»Д¿Д½Ɣ
Switch the appliance off after use, by pressing the ON/OFF button

(9) and disconnect

К¾»ЖВЛ½¼ИЕГК¾»ЙЕ¹Б»КƔ
Press the automatic cord winding button (10) to wind the power cable [Fig. F1].
Hold the plug while winding the cable in order to prevent whiplash.
The flexible suction pipe (5) can be disconnected from the appliance before putting it away.
To do so, press the flexible pipe fastening buttons (6) and disconnect the flexible pipe.
¾»ЙЛ¹К¿ЕДЖ¿Ж»ƺʺƻЕИК¾»¹ЕГ¸¿Д»º¸ÈËɾƺʻƻ¹·Д¸»ЙКЕИ»º¸П¾ЕЕБ¿Д½¿ККЕК¾»·ЖЖВ¿·Д¹»ƒ

К¾»И»В·К¿М»¼¿½ЛИ»Й¿ДК¾»¿ВВЛЙКИ·К¿М»½Л¿º»·И»Г·ИБ»ºН¿К¾К¾»Ж·ИБ¿Д½ЙПГ¸ЕВƾ ¿½Ɣ ʹƑ ʺƿƔ
System Protection Technology:

This appliance features a specific electronic system which monitors the suction air flow
and protects themotor (SPT System Protection Technology). In the event of clogging in the

ЙЛ¹К¿ЕД¿ДВ»КЕИ¿¼К¾»ºËÉʹЕВВ»¹К¿ЕД¾ЕЛЙ¿Д½¿Й¼ËÂÂƑʾ»ƺʹʷƻƾ ¿½Ɣʺƿ¼¿ИЙКН¿ВВ¸В¿ДБ
to indicate such problem: turn the appliance off, remove the object which is causing the
clogging, empty the dust collection housing and clean the filters.
¼ÏÅ˺ÅÄƠÊКЛИДК¾»·ЖЖВ¿·Д¹»Е¼¼·ДºБ»»ЖЕЖ»И·К¿Д½К¾»ЙЛ¹К¿ЕД¼»·КЛИ»Ƒʾ»¿Дº¿¹·КЕИ
will switch to red and after few seconds the SPT will decrease the suction power to the
minimum. In this event, turn the appliance off immediately, remove the object which is
causing the clogging, empty the dust collection housing and clean the filters.

MAINTENANCE

ATTENTION!
Switch the appliance off and disconnect the plug from the socket before
opening the appliance! Make sure all cleaned parts are completely dry
before reusing the appliance!

CLEANING THE APPLIANCE
When necessary, clean the appliance with a damp cloth.

ATTENTION!

DO NOT USE SOLVENTS OR OTHER AGGRESSIVE OR ABRASIVE

DETERGENTS. THIS CAN DAMAGE THE SURFACE.

CLEANING THE COMBINATION BRUSH (4)
With the motor ON, rub the brush with your hand to remove the dust and fluff, which will be
drawn.

CLEANING THE DUST COLLECTION SYSTEM (15)
When the suction power of the vacuum cleaner decreases or the clogged filter LED (20)
turns red, remove the dust from the appliance.

Advertising