Imetec NO-STOP PRESTIGE ECO - Manual (Page 11)

6
GB
6
STEAM IRON OPERATING INSTRUCTIONS
Dear customer, IMETEC would like to thank you for purchasing this product. We are certain that
you will appreciate the quality and reliability of this appliance, which has been designed and
manufactured with customer satisfaction in mind. These operating instructions were created in
accordance with European standard EN 62079.
IMPORTANT!
Instructions and information for a safe use
Please read these instructions completely and in particular the safety instructions before using your
appliance and follow these instructions carefully. Keep these instructions and the associated image
section in a convenient location for reference over the entire service life of the product and be sure
to include it if you pass the appliance on to another user.
INDEX
User instructions page 6
Safety instructions page 6
Description of appliance and accessories page 8
Before use page 8
Filling the reservoir page 8
Ironing page 8
Filling the reservoir while ironing page 9
Cleaning the boiler page 9
After use page 9
Maintenance page 9
Disposal page 10
Service and warranty page 10
Image section I-II
Technical specifications III
SAFETY INTRUCTIONS
• After unpacking, make sure that the appliance is intact with no signs of damage caused by
transport. Should you have any doubts, do not use the appliance and take it to an authorised
IMETEC Service Centre.
• The packaging is not a toy! If present, keep the plastic bag out of the reach of children (risk of
suffocation). Before connecting the appliance to the mains, check that the rating plate specifications
correspond to the electrical mains supply. The plate is on the bottom of the appliance.
• Do not use adapters, multiple sockets and/or extension cords. If the appliance’s plug and the
socket are incompatible, have the socket replaced with a suitable type by qualified staff.
• This appliance must only be used for the purpose for which it has been designed, that is, as a
steam iron. Any other use of the appliance is to be considered improper and therefore dangerous.
The manufacturer cannot be held responsible for any damage due to improper or incorrect use.
• If the appliance is faulty or a malfunction occurs, switch it off. Do not attempt to repair it yourself.
Contact an authorised IMETEC dealer for repairs, and ask that original spare parts are used.
Failure to comply with the above could affect the safety of the appliance.
• If you decide to stop using this appliance, after removing the plug from the mains, it should be
rendered inoperative by cutting the power cord. Any potentially hazardous part of the appliance
should be made safe, especially in consideration of children who may play with old domestic
appliances.