Imetec BF3 300 - Manual (Page 12)

GB
10
MAInTEnAnCE
CLEAnInG
ATTEnTIon!
Do not use acid, abrasive, corrosive or chemical solvents.
Clean the glass surface using a soft damp cloth.
ProBLEMS AnD SoLuTIonS
There are no parts that can be repaired by the user. Should one of the problems indicated
occur, adopt the proposed solution.
Problem Possible cause Solution
The display shows the
symbols below:
Flat battery (the scales
will switch off within a few
seconds).
Change the batteries.
The display shows the
symbols below:
Excessive weight on the
scales.
Remove the weight from the
scales.
The display shows the
symbol below.
(incorrect measurement of
body features):
The position of the feet
on the electrodes is not
correct.
The weight will be displayed
only for 10 seconds.
Step off and back on the
scales correctly (pay attention
to the position of the feet on
the electrodes).