Imetec ECO SB1 100 - Manual (Page 5)

GB
3
SELECTING THE UNIT OF MEASUREMENT
• Place the scales in a well lit environment.
• Wait for the sun symbol to start flashing on the LCD display (1).
• Press the UNIT button (3) to select the unit of measurement (kg/st/lb). Each time it is pressed,
the LCD display changes the unit of measurement shown (1):
USE
• Place the scales on a rigid surface in a well lit environment.
• Step on the scales when the sun symbol starts flashing on the LCD display (1).
• Stand still on the device until the weight is permanently displayed on the LCD (1).
• The weight is displayed for several seconds before the devices turns off automatically.
NOTE: To weigh yourself again, step off the scales and wait for the weight to disappear
from the display and and then step back on the scales.
lb
st
kg
kg
lb
st
kg
kg
lb
st
kg
kg
lb
st
kg
kg