Imetec SENSUIJ ML3-200 - Manual (Page 66)

61
DESCRIPTION OF THE APPLIANCE
AND ACCESSORIES [Fig. A]
1. On/off switch button.
2. Battery compartment.
3. Massaging heads with vibration and light.
ASSEMBLY/PREPARATION [Fig. B]
• Unpack the product.
• Check that it is integral and undamaged.
• Rotate the battery compartment (2) anti-clockwise keeping the lower
part from moving. [Fig. B1]
• Lift the battery compartment.
• Insert 3 AAA batteries (non supplied) in the compartment correctly
following the polarity shown inside. [Fig. B2]
• Close the compartment and rotate it in the opposite direction compared
to the one used to open it.
USE [Fig. C]
• Press the start button (1) to start the massage. The illuminated head (3)
will turn on.
• Press the button once again to switch off the device.
EN