Infinity Drain S-TIF 6540 Series Submittal Sheet - Manual

S-TIF 65 Series
S-TIF 65│Site Sizeable
- Modify length and locate outlet on-site
- Indoor or outdoor use
- Incorporates tile or solid surface material up to 3/4” thick within the
grate frame
- 316 stainless steel grate
- PVC channel
- Works with 2″ clamp down floor drain with 2″ throat (strainer size)
- Uses Hot Mop, Lead Pan, PVC Vinyl Liner, Rubber Liner (Chloraloy™)
Copper Pan or Fiberglass waterproofing
- Grate can be removed completely for cleaning
- Flow rate 9 GPM per outlet*
Finishes:
_____
Satin Stainless
_____ Polished Stainless
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
REV. 08.01.2013
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 1 of 2
2” clamp down drain not
included in kit
Complete Kits:
S-TIF 6540 40″ Complete Kit
S-TIF 6548 48″ Complete Kit
S-TIF 6560 60″ Complete Kit
S-TIF 6572
72″ Complete Kit
S-TIF 6596 96″ Complete Kit
Longer lengths for indoor
or outdoor installations.
Components:
TA 6540 40″ Stainless Steel Grate
TA 6548 48″ Stainless Steel Grate
TA 6560 60″ Stainless Steel Grate
G 6536 36″ PVC Channel
G 6540 40″ PVC Channel
G 6548 48″ PVC Channel
G 6560 60″ PVC Channel
G 6580 80″ PVC Channel
G 6596 96″ PVC Channel
G 65108 108″ PVC Channel
E 65
PVC Stop End
S 50 PVC Threaded Nipple
TIF PL TIF Plates
TKEY Lift Out Key
Add Clamp Down Drain:
CDI 22 Clamp Down Drain Cast Iron
CDA 22 Clamp Down Drain ABS
CDP 22 Clamp Down Drain PVC
Optional Components:
F65 Non Treaded PVC Outlet
GJC 65 PVC Straight Joiner Strip
GAM 65 PVC 90° Angle Joiner
TNRN-P PVC Threaded Nipple, (
extends
2⅜" to the S 50 PVC Threaded Outlet)
UCP 2 Universal 2” Clamping Plate
UCP 4 Universal 4” Clamping Plate
ERB Eccentric Reducer Bushing 4”x2”
Installation (S) Site Sizable