Infinity Drain WW 5-2 Series Submittal Sheet - Manual

WW 5 Series
WW 5│Tile Drain Series
- 12 gauge 316 Stainless Steel Wedge Wire Frame and Body
- Indoor or outdoor use
- Works with 2″ clamp down floor drain with 2″ throat (strainer size)
- Uses Hot Mop, Lead Pan, PVC Vinyl Liner, Rubber Liner (Chloraloy™)
Copper Pan or Fiberglass waterproofing
- Grate can be removed completely for cleaning
- Flow rate 9 GPM per outlet*
Complete Kits:
WW 5-2I SS Clamp Down Drain Cast Iron
WW 5-2I PS Clamp Down Drain Cast Iron
WW 5-2A SS Clamp Down Drain ABS
WW 5-2A PS Clamp Down Drain ABS
WW 5-2P SS Clamp Down Drain PVC
WW 5-2P PS Clamp Down Drain PVC
Components:
W5-2 SS 5” x 5” Strainer Only
W5-2 PS 5” x 5” Strainer Only
CDI 22 Clamp Down Drain Cast Iron
CDA 22 Clamp Down Drain ABS
CDP 22 Clamp Down Drain PVC
Dimension are subject to Manufacturers tolerance and change without notice. We can assume no responsibility for use of superseded or void data.
Infinity Drain
18 Secatoag Avenue
Port Washington, NY 11050
Phone: 516.767.6786
Fax: 516.740.3066
www.InfinityDrain.com
REV. 08.01.2013
Note: Installer must verify all rough-in
dimensions prior to installation and consult
local and national codes. Conformity and
compliance to local and national codes
are the responsibility of the installer.
Page 1 of 2
Finishes:
_____
Satin Stainless
_____
Polished Stainless
Installation (TD) Center Drain