Description, 1 physical description – IPX DDK-1700D User Manual
Page 6
6
1
2
3
4 5
6
7
8
9
10
1
2
3
4 5
6
7
8
9
10
1. DESCRIPTION
1.1 PHYSICAL DESCRIPTION
1.
Power Input: DC 12V input connects to an external power supply.
2.
Power Input: AC 24V input connects to an external power supply.
3.
ETHERNET 10/100 Connector: Standard RJ-45 connector for 10/100 Mbps Ethernet
networks. PoE (Power over Ethernet) function:
Provides power to the device via the same
cable as used for the network connection.
4.
AUDIO IN: Connector is used to connect the audio output from other devices to the
DDK-1700D.
5.
VIDEO OUT Connector: Connector provides Composite video output
6.
AUDIO OUT: Provides DDK-1700D audio signal to an external device.
7.
GPIO: 6-PIN connector for digital I/O, DC output and GROUND for connecting with external
devices.
8.
USB port: Connects DDK-1700D to USB port on a PC.
9.
SD/ SDHC CARD slot: Used for updating system software and archiving video.
10. RESET: Reset to factory default. (Refer to section 2.4 The Reset Button.)