Ultimate Support TS-110BL - Manual (Page 2)

3 2
set-up
1
2
3
STEP 5
Put speaker on stand. Firmly grip large ergonomic handle, loosen
hand knob and guide telescoping tube to desired height. The gas
shock is under a 50 lb. preload allowing you to raise speakers
weighing less than 50 lbs. with zero effort; for speakers over
50 lbs., exert very little effort to raise the speaker. Tighten hand
knob. CAUTION: For light speakers, keep a tight hold on grip while
loosening hand knob.
To lower speaker, firmly grip large ergonomic handle, loosen hand
knob and guide telescoping tube down. Lighter speakers will take
more effort to lower. Tighten hand knob.
STEP 1
Loosen leg fitting hand knob.
STEP 2
Turn stand upside down and pivot legs so Ultimate Support label
faces you.
STEP 3
Turn stand upright and slide leg fitting to adjust diameter of leg
spread. Leg braces should be parallel to floor for maximum stability.
Tighten hand knob.
STEP 4
The built-in adapter fits both 1-1/2” or 1-3/8” internal diameter speaker
sockets. Use the lower position for 1-1/2”. For 1-3/8” sockets, depress
push buttons and raise adapter until it locks in raised position. 4
5
TS-100B
• Item #16759— black
• Height 3’8” - 6’7”
(1118 mm - 2007 mm)
• Weight 12.1 lbs. (5.5 kg)
• Base diameter 47” (1194 mm)
• Telescoping tube diameter
1.5 (38 mm)
• Adapter diameter
1.375 (35 mm)
• Load capacity of
150 lbs. (68.2 kg)
• Folded 43.5” x 5.5”
(1105 mm x 140 mm)
TS-110B
• Item #17356— black
• Height 5.2” - 9.2”
(1575 mm - 2794 mm)
• Weight 17.2 lbs. (7.8 kg)
• Base diameter 62” (1575 mm)
• Telescoping tube diameter
1.5 (38 mm)
• Adapter diameter
1.375 (35 mm)
• Load capacity of
150 lbs. (68.2 kg)
• Folded 57.5” x 5.5”
(1463 mm x 140 mm)
TS-100BL
• Item #17357— black
• Height 5.2” - 9.2”
(1575 mm - 2794 mm)
• Weight 17.6 lbs. (8 kg)
• Base diameter 62” (1575 mm)
• Telescoping tube diameter
1.5 (38 mm)
• Adapter diameter
1.375 (35 mm)
• Load capacity of
150 lbs. (68.2 kg)
• Folded 57.5” x 5.5”
(1463 mm x 140 mm)