Lenmar PPU2100WB User Manual
Lenmar Power suppliers
Model PPU2100
PowerPort™ Portable Charger & Battery
PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS PRODUCT. IT CONTAINS
IMPORTANT OPERATING INSTRUCTIONS FOR YOUR POWERPORT UNIT.
Owner’s Manual
Thank you for purchasing the PowerPort Portable Charger and Battery. Take the compact, lightweight
PowerPort with you wherever you go and have a handy charger or rescue battery that works anywhere!
PowerPort charges your PDA, cell phone, MP3 player, game system, or any device that can be charged via
a USB cable connection.
Included in the package you have purchased:
t1PXFS1PSU$IBSHFS#BUUFSZ
t64#DIBSHFDBCMF
t"EBQUFSUJQTGPSWBSJPVTNPCJMFEFWJDFT
Note: Some PPU2100 products will include additional tips and accessories.
1. Attach the Mini USB adapter tip to the small end of the cable (B). Plug tip in to the
Mini USB connector on the top of the PowerPort.
2. Plug the USB end of the cable (A) in to any powered USB port, such as a Lenmar model ACUSB1 AC to USB
power adapter or Lenmar model AIDCU DC to USB power adapter (included with some PPU2100 models).
3. While charging, the LED Battery Status Indicator will light up red.
4. When the charge has been completed the LED will turn blue.
5. Once the charge indicator shows the charge has completed, disconnect the battery from
the USB power source. Your PowerPort is ready to go.
Note: If charging your PowerPort unit from a computer, the computer must be turned on and running.
1. Plug the USB end of the cable (A) into the USB power output connector on
the top of the PowerPort (see diagram).
2. Choose the appropriate adapter tip for your device and attach it to the
small end of the cable (B).
3. Connect the tip to your device.
4. Press the status indicator button to activate the PowerPort; the PowerPort’s
LED should illuminate blue. Your device should now indicate that it is receiving
power. You must press the status indicator button to fully utilize the PowerPort.
Some devices will appear to be charging as soon as they are connected to the
PowerPort, even if the status indicator button has not been pressed. The
PowerPort will emit a small amount of power upon connection to the device,
however, this is not enough current to deliver a full charge.
5. If you are using the PowerPort to recharge your device, be sure to disconnect
as soon as possible after your device is recharged to conserve the power in the
PowerPort, and to avoid overcharging your device’s battery.
Limited 2 Year Warranty
This limited warranty starts from the date of original purchase and expires two years thereafter. If, during this period, any part, because of manufacturing defects or
workmanship, fails to function properly under normal use it will be repaired at no charge for parts and labor or, at our option, the product will be replaced. The following
is excluded: damages from delay or loss of use of equipment or damaged batteries, malfunctions resulting from misuse, tampering, unauthorized repairs, modifications
or accident.
Package the unit and its accessories carefully using ample padding material to prevent damage in transit and ship it prepaid and insured to:
LENMAR ENTERPRISES, INC.
4035 Via Pescador
Camarillo, CA 93012 USA
When sending in product for service, your package should include evidence of date and place of purchase. Enclose $10.00 for shipping and handling for addresses in
the U.S. and $15.00 in Canada. For outside the U.S. and Canada, freight will vary depending upon ship-to address.
Proposition 65 Notice (California)
The following statement is required in the state of California pursuant to the settlement of an action brought by the Mateel Environmental Justice Foundation against
multiple electronics and appliance manufacturers
t8"3/*/()BOEMJOHUIFDPSEPOUIJTQSPEVDUXJMMFYQPTFZPVUPMFBE BDIFNJDBMLOPXOUPUIFTUBUFPG$BMJGPSOJBUPDBVTFCJSUIEFGFDUTPSPUIFSSFQSPEVDUJWFIBSN
Wash hands after handling.
For additional questions, comments or to explore other Lenmar battery solutions, visit our web site at: www.poweredbylenmar.com or
DBMMGSPN".o1.145
Caution:
t%POPUPWFSDIBSHFUIF1PXFS1PSU BTJUXJMMTIPSUFOJUTMJGFTQBO
Disconnect the PowerPort as soon as it is practical after the charge is complete.
t1PXFS1PSUBOEDBCMFBSFGPSESZVTFPOMZ/FWFSVTFOFBSXBUFSPSBMMPXUPHFUXFU
t3FDZDMFPSEJTQPTFPG1PXFS1PSUQSPQFSMZ*GEJTQPTFEPGJOöSFPSTIPSUDJSDVJUFE
PowerPort may leak or explode, causing personal injury,
t%POPUESPQ
t8IFOOPUJOVTF VOQMVHUIF1PXFS1PSUGSPNUIFDIBSHFDBCMFBOEBMMEFWJDFT
Note:
t1PXFS1PSUNVTUCFDIBSHFEQSJPSUPöSTUVTF
t1PXFS1PSUNBZCFDPNFXBSNEVSJOHDIBSHJOHPSVTF
Charging Your PowerPort
Charging Your Device Using Your PowerPort
Specifications
Capacity:
Charge Input:
Charge Time:
Output:
Status Indicator:
Protection:
Dimensions:
Weight:
2100mAh
5VDC, 1000mA
Approx. 4-6 Hours max.
5VDC, 700mA max. (7.8Wh)
2-color LED
Over-charge, over-discharge, short-circuit
3.9 x 2.4 x 0.4 in.
~2.7 oz.
307-127-W r4
Lithium-Ion battery must be
recycled or dispose of properly.
USB Power Output Connector
Battery Indicator Light
#MVF*O6TF0,GPS6TF
Red - Recharge
Flashing - Low Battery
USB End
of Cable (A)
or
or any powered USB port
or
Lenmar model ACUSB1
AC -USB adapter
Lenmar model AIDCU
DC -USB adapter
Diagram:
Small End
of Cable (B)
Adapter Tip
Mini USB
Connector