NZXT HALE82 v2 550W - Manual (Page 10)

EN INSTALLATION
8
OR
2. Connect the 24-pin Main Power Connector to your motherboard.
If your mother board uses a 20-Pin connector, detach the 4-pin
attachment on the 24-pin connector. Note: The detachable 4-pin
section cannot be used in place of a 4-pin and ATX 12V connector
1. Install the HALE82 V2S / V2 into your case
with the four screws provided.
4. Connect the modular cable(s) to the socket on the power
supply as needed.
5. Connect the AC power cord to the power supply AC inlet and
turn the switch to the "I" position.
3. Connect the 8-pin or 4-pin
connector(s) for the CPU(s).