NZXT Apollo - Manual (Page 8)

NZXT. 6
ASUS© Motherboard Pin Assignment
5.25” Screwless Drive Bay Installation
1. The NZXT Apollo comes with a lock on screw less drive
cage design so you can easily pull out and replace drives.
For the 5.25” devices, match the screw hole of your drive
with the drive bay holder and make sure the device is where
you want it.
2. Remove the front panel and steel plate in the designated
drive bay.
3.
Slide the 5.25” device into the drive bay from the front of the
case.
4. Lock and secure the drive in by pushing the lock towards the
front of the case and then pushing the other button
downwards. Refer to the figure below for more explanation
on the motion.
Step 1. Push to the Right