Description, Getting prepared for, A how to epilate – Braun 7681-5377 Silk-épil 7 Legs Body & Face User Manual

Page 9

Advertising
background image

9

applying a moisture cream after epilation.

The regular use of massage sponges (e.g.

after showering) or exfoliation peelings helps

to prevent in-growing hair as the gentle

scrubbing action removes the upper skin

layer and fine hair can get through to the skin

surface.

Description

1a High Frequency Massage System

1b EfficiencyPro cap

2 Epilation

head

3 «smartlight»

4 Switch with lock keys (4a)

5a Charging light

5b Low charge light

6 Release

button

7 Special cord set
Only with 7681 model:

8 Underarm

cap

9 Precision

cap

10 Shaver head attachment with OptiTrim

comb

Charging

• Before use, charge the appliance. For best

performance, we recommend that you

always use a fully charged appliance.

Using the special cord set, connect the

appliance to an electrical outlet with the

motor switched off. Charging time is

approximately 1 hour.

• The green charging light (5a) flashes to show

that the epilator is being charged. When the

battery is fully charged, the charging light

shines permanently. Once fully charged, use

the appliance without cord.

• When the red low-charge light (5b) flashes,

reconnect the appliance to an electrical

outlet via the special cord set to recharge.

• A full charge provides up to 40 minutes of

cordless operation time.

• Wet usage might reduce the operation

time. We recommend that you recharge the

appliance after each usage.

• The best temperature range for charging,

using and storing the appliance is between

59 °F and 95 °F. In case the temperature is

far beyond this range, the charging time

might be longer whereas the cordless

operation time might be reduced.

Getting prepared for …

… dry usage

Your skin must be dry and free from grease or

cream.

… wet usage

The appliance can be used on wet skin, even

under running water. Make sure that the skin

is very moist in order to achieve optimum

gliding conditions for the appliance. After

each wet usage, clean the appliance under

running water.

• Before use, always make sure that epilation

head (2) is clean and provided with a cap.

• To change caps, press their lateral ribs and

pull off.

• To change heads, press the release button

(6).

A How to epilate

The epilation head (2) features the new

Close-Grip Technology to help ensure extra

efficiency especially with short hairs: The

40 tweezers always keep close contact to

the skin to remove hairs as short as grain

of sand. Thanks to its pivoting feature, it

perfectly adapts to the body contours, for

maximum thoroughness.

The High-Frequency Massage System (1a)

soothes your skin effectively for an ultra

gentle epilation.

99683014_SE7681_NA.indd 9

99683014_SE7681_NA.indd 9

21.10.10 13:09

21.10.10 13:09

Advertising
This manual is related to the following products: