Andrew James AJ000145 Food Processor - Manual (Page 6)

6
Assembling the appliance
1. Place the appliance so that the switch plate (8) on the power unit is facing
directly towards yourself.
2. Attach the bowl (7) to the power unit (9) so that the handle faces in the 2 o’clock
position (the bowl should fit into the slots of the power unit).
3. Rotate the handle of the bowl (7) clockwise until it is in the 3 o’clock position. It
is firmly locked in place once a “clicking” sound can be heard.
4. Fit the bowl cover lid (2) on top of the bowl aligning it with the locking system in
the 2 o’clock position.
5. As previously done in step 3, rotate the unit until it is at the 3 o’clock position
and locks into place.
6. Turn the switch plate (8) to on. If the machine does not work this is frequently
down to incorrect assembly. Please start the process over again.
Functions
Chopping
1. Follow steps 1 to 3 as described in “Assembling the appliance”.
2. Place the blade support (6) into the centre of the bowl (7) ensuring that it is
securely fitted (if it can rotate freely then it is not securely fitted).
3. Fit the chopping blade (4) onto the blade support (6), it should rest at the
bottom of the blade support.
4. Place the ingredients you wish the chop into the bowl (7).
5. Follow steps 4 and 5 “in assembling the appliance” to complete the assembly.
Please note: The pulse speed setting is only to be used for short intermittent bursts for
chopping and processing at maximum speed.