Andrew James AJ000477 Multi Cooker - Manual (Page 5)

5
Connecting the Unit
1. Connect the temperature regulator to the base of the basic unit.
Make sure that the plug is connected properly (Fig. 1).
2. Set the temperature selector switch to heat level “0” (Fig. 2).
3. Connect the plug to a 230V 50Hz fuse socket.
Attention: Do not use a multi plug or extension cable.
Fig. 1 Fig. 2
Preparing the unit
Before using the unit for the first time, carefully clean the unit and cover. Do
not use detergents, brushes with metal or nylon bristles or sharp objects
such as knives and spatulas to the clean the unit. Avoid damaging the non-
stick coating. Always dry the unit thoroughly after cleaning it .