Andrew James AJ000510 1.5 Litre Premium Slow Cooker - Manual (Page 7)

7
be little heat loss. Due to normal wear and tear through the products life,
the outer surface of the ceramic pot may start appearing crazed, this is
normal and will not hinder the performance of the ceramic pot.

Do not put the ceramic pot or glass lid in an oven, freezer, microwave or on a
gas/electrical hob.

Do not subject the ceramic pot or glass lid to sudden changes in temperature
e.g. adding cold water to a very hot pot as this could cause it to crack.

Do not allow the pot to stand in water for a long time (you can leave water
in the pot to soak).

There is an area on the base of the ceramic pot that has to remain unglazed
for manufacturing purposes. This unglazed area is porous and will soak up
water when immersed in it. This should be avoided.

Do not switch the cooker on when the ceramic pot is empty or out of the
slow cooker base.