SM Pro Audio M-Patch V2: Passive Monitor Controller - Manual (Page 6)

6
4.2 Aux Inputs
The Aux input channel features two different connection possibilities in the form of
2 x RCA (L&R) and a stereo 3.5mm mini-jack input. These connections are perfect
for devices such as a CD players line output or a 3.5mm stereo mini-jack connection
from your PC‘s standard soundcard.
* Note: You can connect up to three different devices to the three physical connector
possibilities simultaneously. The input selector on the front panel allows selection of
the desired input!
4.3 Analog Audio Outputs
The M-Patch V2 features two (2) pairs (L&R) of XLR balanced analog output con-
nectors on the rear panel. These are labeled “1” & “2”.
Connect these outputs to your destination device (active monitors, digital recorder,
or wherever you need the attenuated output signal sent).
* Note: It is possible to activate or deactivate each desired output pair via the
‚output selector switches‘ on the front panel. It is possible to have both 1&2 out-
puts active at the same time. This is very useful when connecting the outputs to a
recording device and a monitoring device simultaneously!