NXG Technology NX-HDMIX-ET-IR-120-1 - HDMI over single Ethernet User Manual
Nx-hdmix-et-ir-120-1 hdmi extender over ethernet
8
1
OPERATING INSTRUCTIONS
NX-HDMIX-ET-IR-120-1
HDMI Extender over Ethernet
DEAR CUSTOMER:
Thank you for purchasing this NXG Technology product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting this product.
Please keep this manual in a safe place for future reference.
FEATURES
• HDCP version 2.0 compliant
• Supports 1080p and 720p video, plus 2-channel audio
• One source can feed up to 125 HDTVs
• Uses off-the-shelf gigabit IP switches for extension and distribution
• Plug-and-play operation - no programming or setup required
• Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
• Cable runs can be extended another 120m by adding a Gigabit Ethernet switch
• Uni-cast, multicast or broadcast capable for different applications
• IR source control pass through
• Cascaded a maximum of 3 Ethernet switches
NOTE:
NXG Technology reserves the right to make changes in the hardware, specifications, packaging
and any accompanying documentation without prior written notice.