Cla-Val 350-07/3650-07 - Manual (Page 20)

Page 2
1) Select NO automatic updates.
2) Select install from a list and NOT
automatic.
3) Select and browse to file:
C\Program Files\CLA-VAL\e-Drive
Setup or to where you saved the folder.
4) Microsoft validation - press Continue.
5) Installation started - press OK
6) Press Finish -
Installation completed.
Software Download Instructions
Supported Operating Systems are Windows XP and XP Service Pack 2
1) Go to Cla-Val website (www.cla-val.com) and navi-
gate to 32 Series actuator software download page. Click the
Download 130VC-2 Range Software button to start the download.
2) Do one of the following:
_ To start the installation immediately, click RUN to run
this program from its current location. Highly recommended .
_ To copy the download to your computer for installa-
tion at a later time, click SAVE to save this program.
3) This program will automatically be installed in new e-
Drive folder in C: Program Files/Cla-Val folder on your computer. A
new Cla-Val folder is created in Program Files folder and an "e-
Drive" icon link is created on Desktop to start program.
Communications Cable Driver
When 130VC-2 communications cable is installed in your laptop
computer USB port for the first time, Windows will search your
computer for the cable USB driver. If Windows Plug-and-Play does
not automatically find the driver and connect to actuator, then the
cable driver must be set-up manually. Windows will take you step-
by-step through the manual set-up process. The cable USB driver
is installed during software download. You will have to browse to
the Cla-Val folder created during download where the driver file is
located. Use the following instructions to manually activating the
cable driver.