Cla-Val CFC2 - Manual (Page 2)

CFC2
Float Control
For Closed Tanks
Specifications
• Accurate Liquid Level Control
• Fully Hydraulic Operation
• Simple Design, Easy Maintenance
• No Lubrication Necessary
• No Gears, No Mechanical Linkage Between
Valve and Control
The Cla-Val Model CFC2 Float Control is a float-actuated, multi-
port pilot control which provides non-modulating, two-position, on-
off operation. It is used primarily to operate remotely located Cla-
Val Valves requiring three-way or four-way pilot valve operation.
Designed for use in closed tanks, this control operates on a
minimum level change of approximately one inch. Maximum level
change of five and one-half inches is needed for full capacity.
Note: We recommend protecting the control tubing and valve from
freezing temperatures.
Dimensions (In Inches)
Control Piping
Connections 1 ⁄
8
" NPT
Reservoir
Connections 1" NPT
Pressure Rating 0-150 psi
Temperature
Rating Water: to 180°F.
Materials In contact with operating fluid:
Brass, Stainless Steel, Monel, with
Buna-N ® Seals
Float chamber:
Cast Iron
Pilot valve housing:
Bronze
Materials in contact with operating fluid:
Brass, Stainless Steel, Monel with
Buna-N ® Seals
Float ball:
Stainless Steel
Float arm:
Brass
Other material available:
Cast steel or aluminum chamber and
pilot valve housing. All stainless steel
Level Differential Approximately 1" minimum required to
change pilot valve operation. 5 5 ⁄
16
"
required to develop full capacity.
Operating Fluids Clean liquids or gases compatible with
specified materials.
Shipping Weight 12 lbs.
Reservoir Connection
1" NPT (Typ. Both Ends 2 Places)
8.75 6.50
Port 2
1/8" NPT
(Typ. 4
Places)
Port 1
Drain
Supply
7.00
7.13
3.0
Flo
at
Tra
ve
l
5.3
2 11.
62
MODEL