Cla-Val 736-01 - Manual (Page 2)

F
B
3
D1 C
2
B
1
D2
S
B
H
DRAIN TO
ATMOSPHERE
INLET OUTLET
INDEPENDENT
OPERATING
PRESSURE
CS3
3
1
2
* The opening & closing speed controls (optional) on this valve
should always be open at least 1 ⁄
4
turn off their seats.
** Solenoid requires operating voltage, enclosure
type, and normally open or normally closed main valve.
736-01 Basic Components
Item Description
1 100-42 Roll Seal Main Valve
2 CS3 Solenoid Control**
3 X43 "Y" Strainer
Optional Features
Item Description
B CK2 (Isolation Valve)
C CNA Needle Valve (Closing)*
D Check Valves (125 psid max.
reverse pressure)
F Independent Operating Pressure
H Atmospheric Drain
S CNA Needle Valve (Opening)*
PO Box 1325 Newport Beach CA 92659-0325
Phone: 949-722-4800 Fax: 949-548-5441
CLA-VAL
CLA-VAL CANADA CLA-VAL EUROPE
4687 Christie Drive
Beamsville, Ontario
Canada L0R 1B4
Phone: 905-563-4963
Fax: 905-563-4040 Chemin dés Mesanges 1
CH-1032 Romanel/
Lausanne, Switzerland
Phone: 41-21-643-15-55
Fax: 41-21-643-15-50
© COPYRIGHT CLA-VAL 2014 Printed in USA
Specifications subject to change without notice. www.cla-val.com
E-736-01 (R-07/2014)
Represented By:
When Ordering Please Specify:
1. Catalog No. 736-01 2. Valve Size 3. Fluid Being Handled 4. Fluid Temperature Range 5. Inlet Pressure Range
6. Outlet Pressure Range 7. Maximum Differential Pressure 8. Minimum Differential Pressure
9. Maximum Flow Rate 10. Voltage & NO, NC (Main Valve)
"E" N.P.T. "E" N.P.T.
"E" N.P.T.
"D"
DIA.
"B"
DIA.
"C"
6", 8",10" and 12" Flanged Style
3/8" N.P.T.
3 PORTS
"A" TYP.
"BB"
DIA.
FLOW
"CC"
2", 3", 4" and 6" Wafer Style
NSF Approved 2" thru 12"
Dimensions (100-42 Main Valve)
Valve Size (Inches) 2 3 4 6 8 10 12
A 2 7 ⁄
8
3 9 ⁄
16
4 1 ⁄
8
5 1 ⁄
4
-- -- --
B -- -- -- 10 7 ⁄
8
14 3 ⁄
8
18 21 5 ⁄
8
BB 4 3 ⁄
8
5 7 ⁄
8
7 3 ⁄
8
9 13 ⁄
16
-- -- --
C -- -- -- 9 11 13 15 1 ⁄
4
CC 2 1 ⁄
2
3 1 ⁄
4
4 5 1 ⁄
2
-- -- --
D (ANSI 150) -- -- -- 11 13 1 ⁄
2
16 19
D (ANSI 300) -- -- -- 12 1 ⁄
2
15 17 1 ⁄
2
20 1 ⁄
2
E (Ports) NPT -- -- -- 3 ⁄
8
3 ⁄
8
1 ⁄
2
1 ⁄
2
Approx. Wt. (150 lbs.) 4 7 1 ⁄
2
14 58 115 190 290
Approx. Wt. (300 lbs.) 4 7 1 ⁄
2
14 87 155 250 375
Max. Continuous Flow (gpm) 224 469 794 1787 3177 4964 7148
Valve Size (mm for ANSI) 50 80 100 150 200 250 300
A 73 90 105 133 -- -- --
B -- -- -- 276 356 457 549
BB 111 149 187 249 -- -- --
C -- -- -- 229 279 330 387
CC 64 83 102 140 -- -- --
D (ANSI 150) -- -- -- 279 343 406 483
D (ANSI 300) -- -- -- 318 381 445 521
E (Ports) NPT -- -- -- 3 ⁄
8
3 ⁄
8
1 ⁄
2
1 ⁄
2
Approx. kg. (150 lbs.) 1.81 3.63 6.35 30 54.43 89 151.5
Approx. kg. (150 lbs.) with Studs & Nuts 2.72 4.54 10 -- -- -- --
Approx. kg. (300 lbs.) 1.81 3.63 6.35 41.73 72.57 116.57 191
Approx. kg. (300 lbs.) with Studs & Nuts 5 6.35 11.8 -- -- -- --
Max. Continuous Flow (l/s.) 14 30 50 113 200 301 451